|
Post by Slam_Shifter on Nov 30, 2005 11:55:04 GMT -5
This should cover all the '77 up sedans with the exception of the '76-'77 Malibu, Monte,Cutlass, etc. Those tips are similar to the 74-76 Fullsize so they can be found there.
|
|
|
Post by dadicted on Nov 30, 2005 18:22:44 GMT -5
tuck and notch the rear and prebend it as well. put a good bumper on the front and use that more than anything.
|
|
|
Post by chryslerfat on Dec 1, 2005 9:41:37 GMT -5
Pull the body and weld the frame seams then bolt it back solid. Make sure you weld the frame across under the motor good they buckle here when you take a good wheel shot!
|
|
|
Post by getbentdemo01 on Dec 6, 2005 22:06:50 GMT -5
chain the humps together if rules allow and bolt the frame in three or four spots below the driver and passenger door i snapped the passenger side this year front end went sky high
|
|
|
Post by chryslerfat on Dec 7, 2005 9:06:24 GMT -5
Drill a small hole in the bumper shocks near the bumper collapse the shocks and weld or I have seen the shocks pull apart or break.
|
|
|
Post by dadicted on Jan 4, 2006 18:18:21 GMT -5
change the front bumper to a welded up 70s bumper and u wont have that problem.
|
|
|
Post by JWG G24 on Jun 15, 2013 15:32:28 GMT -5
|
|