|
Post by crash21 on Jan 12, 2006 22:38:01 GMT -5
A guy a work has a 1969 pontiac wagon that I might be able to get. Is this a good car to run? I've only really run square backs. Any feed back would be appreciated.
Crash 21
|
|
|
Post by dadicted on Jan 13, 2006 0:07:40 GMT -5
not really. the sheet metal is thinner as is the frame, the rear is c-channel like the 71-73 gms. oh and did i not mention that they are NOT leafed.
|
|
|
Post by Shorty Thompson on Jan 13, 2006 3:39:30 GMT -5
if you can leaf them , you can get by ok wth it though
|
|
|
Post by crash21 on Jan 13, 2006 6:17:52 GMT -5
Would it do ok in a no weld derby, or would I have to weld alot to have a chance?
|
|
|
Post by keystone121 on Jan 13, 2006 7:24:55 GMT -5
Do yourself a favor and pass on that one. By the time you make motor mounts, throttle linkage, get the front drum brakes working, ect, it's still junk. I know that it looks neat but a 77 and newer GM will do much better in a no weld without all the work. I ran a '69 Kingswood and even welded it was probably the worst derby car I ever had. Absolutely NO front end and 3 short shots to the back and it was on the ground (JUNK)
|
|
|
Post by crash21 on Jan 13, 2006 20:03:43 GMT -5
Thanks guys. This is why I asked.
|
|